Products

GARDA-LINE Drain

 

OVERVIEW
Material: 304 Stainless Steel
Material Thickness: 16 Gauge
Installation Type: Pipe attached to linear drain
connects directly into waste
pipe from ground via rubber coupling
Preferred Waterproofing: Membrane or Liquid Waterproofing
Lower Tray: Pre-sloped Towards Outlet
Height: Adjustable
Length: Standard or Custom
Outlet Centered: Yes
Outlet Offset: Available
ADA Compliant: Yes

DERA-LINE Drain
OVERVIEW  
Material 304 Stainless Steel
MaterialThickness 18 Gauge
Installation Type Over top of existing standard shower drain
Preferred Waterproofing Liner Waterproofing
Lower Tray Sloped towards outlet via break-liners
Height Adjustable
Size Standard and Custom
Outlet Location Standard and  Custom
ADA Compliant Yes

 



Tile-insert Square Drain

Tile Insert Square drain is the most versatile drainage solution, designed for tile in applications. Install in a new bathroom for a modern look or for a quick bathroom update. The Tile-Inset square drain comes conveniently in a kit containing all you need for install. The Tile Insert square drain is 5" wide, made of stainless steel.


Geotop Square Drain

Descriptionof Geotop square drain


Wedge Wire Square Drain

Architectural  Grates are perfectly flat with a satin smooth surface. Stainless steel screens are made from V shaped profile wire which is spirally wound
around a cage of longitudinal support rods. Each intersecting point of these wires is fusion welded, with a unique welding process.
The width of the grate is 5"inches and 1"inch deep above ground



GARDA

GARDA fleece waterproofing membrane is to be applied for tiled showers and baths providing a vapor tight barrier ensuring superior moisure management

Eliminates risk of leaks and mold growth from penetrating the base or the solid backing on walls

Fabricated from Polyethelene membrane with a polypropylene fleece


GARDA Strips

Strips to be used with GARDA Waterproofing to seal off seams for a complete waterproof bath or shower system

 

 


GARDA Rozek

GARDA corner unit to be used in conjunction with GARDA Waterproofing and GARDA Seams to seal corners

Outside and inside corner units are available



Home»Waterproofing»
GARDA Strips

Instructions for installing GARDA Strips are for representative purposes only. Please refer to the Waterproofing Strips Installation download.

APPLICATION:

Once the Garda Waterproofing is installed from seam to seam on backing

Apply thin mortar set onto seams with trowel over the Garda Waterproofing and apply GARDA Waterproofing strips firmly into centre of seam with approximately 2.5 inches of strip remaining on either side of seam. The GARDA Strip will overlap onto the GARDA Waterproofing to ensure an air tight seal.

Ensure that the entire strip is adhered to the thin set mortar

Wipe off excess thin set mortar portruding from seam onto GARDA Waterproofing

The thin set mortar is applied and must be appropriate for the substrate- generally an un-modified thin set mortar is used

Width of GARDA strips does not require to be cut to size